|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MAADSS0014 Digital Attenuator, 4-Bit, Single Control 30 dB, 0.05 - 4.0 GHz Features * * * * * * * * * * Integrated Logic Positive Single Control Insertion Loss: 1.3 dB @ 1.0 GHz IP3: 42 dBm typical @ 2.0 GHz Attenuation Accuracy: 0.2 dB + 2% @ 1.0 GHz 2-dB Attenuation Steps to 30 dB Low DC Power Consumption Lead-Free 3mm PQFN-16LD Plastic Package Halogen-Free "Green" Mold Compound RoHS* Compliant and 260C Re-flow Compatible Rev. V2 Functional Schematic3,4 Description The MAADSS0014 is a 4-Bit, 2dB step GaAs MMIC digital attenuator in a lead-free 3mm PQFN-16LD surface mount plastic package. The MAADSS0014 is ideally suited for use where high accuracy, very low power consumption and low intermodulation products are required. Typical applications include radio, cellular, wireless LANs, GPS equipment and other gain / level control circuits. The MAADSS0014 is part of a digital attenuator family. This family includes 4, 5, and 6 bit attenuators with 0.5, 1, or 2 dB steps and up to 31.5 range. 3. Blocking capacitors are required on all RF ports. 4. RF Port and Ground pin capacitors are 1000 pF. Pin Configuration5 Pin No. 1 2 3 4 5 6 7 Function VDD RF In/Out Ext. C to GND Ext. C to GND Ext. C to GND Ext. C to GND Ext. C to GND Ext. C to GND Pin No. 9 10 11 12 13 14 15 16 Function Ext. C to GND Ext. C to GND RF In/Out N/C or GND V16 (16dB Bit) V8 (8dB Bit) V4 (4dB Bit) V2 (2dB Bit) Ordering Information 1,2 Part Number MAADSS0014TR-1000 MAADSS0014TR-3000 MAADSS0014SMB Package 1000 piece reel 3000 piece reel Sample Board 8 5. The exposed pad centered on the package bottom should be grounded. Absolute Maximum Ratings6,7 Parameter Input Power 0.5 - 4.0 GHz Control Voltage Operating Temperature Storage Temperature Absolute Maximum +33 dBm -0.5 V < VC < 5.5 V -40C to +85C -65C to +150C 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM Technology does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAADSS0014 Digital Attenuator, 4-Bit, Single Control 30 dB, 0.05 - 4.0 GHz Electrical Specifications8,9: TA = 25C, Z0 = 50 , VDD = 5 V, VC = 2.8 V Parameter Reference Insertion Loss Attenuation Accuracy VSWR Trise, Tfall Ton, Toff Transients Input P1dB Input IP2 Test Conditions 1.0 GHz 1.0 GHz 0.05 - 4.0 GHz 10% to 90% RF, 90% to 10% RF 50% Control to 90% RF, 50% Control to 10% RF In Band 2.0 GHz 2-Tone, +5 dBm/tone, 1 MHz Spacing 0.5 GHz 2.0 GHz 2-Tone, +5 dBm/tone, 1 MHz Spacing 0.5, 2.0 GHz VC = 2.8 V VDD = 5 V Units dB Ratio ns ns mV dBm dBm Min. -- -- -- -- -- -- -- -- -- -- -- Typ. 1.3 1.5:1 40 65 75 30 75 80 42 15 170 Max. 1.7 -- -- -- -- -- -- -- -- 25 250 Rev. V2 (0.2 dB + 2% of attenuation setting in dB) dB Input IP3 IC IDD dBm A A 8. External DC blocking capacitors are required on all RF ports. 9. Low frequency is determined by DC block and GND capacitor value Truth Table10 VC2 0 1 0 0 0 1 VC4 0 0 1 0 0 1 VC8 0 0 0 1 0 1 VC16 0 0 0 0 1 1 Attenuation (dB) Reference IL 2 4 8 16 30 Recommended PCB 10. 0 = 0 0.2 V, 1 = +2.8 to 5 V. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Off-Chip Component Values Component C1 - C10 Value 1000 Pf Package 0201 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAADSS0014 Digital Attenuator, 4-Bit, Single Control 30 dB, 0.05 - 4.0 GHz Typical Performance Curves Insertion Loss 0.0 -0.5 -1.0 -1.5 -20 -2.0 -2.5 -3.0 0.5 -25 -30 -35 0.5 2 dB 4 dB 8 dB 16 dB 30 dB +25C -40C +85C Rev. V2 Relative Attenuation across all major states 0 -5 -10 -15 1.0 1.5 2.0 2.5 3.0 3.5 4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Frequency (GHz) Input Return Loss, Insertion Loss State 0 +25C -40C +85C Input Return Loss, across all major attenuation states 0 -10 -20 -30 -10 -20 -40 -30 -50 -60 -40 0.5 -70 0.5 2 dB 4 dB 8 dB 16 dB 30 dB 1.0 1.5 2.0 2.5 3.0 3.5 4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Frequency (GHz) Output Return Loss, Insertion Loss State 0 +25C -40C +85C Output Return Loss, across all major attenuation states 0 -10 -20 -30 -10 -20 -40 -30 -50 -60 -40 0.5 -70 0.5 2 dB 4 dB 8 dB 16 dB 30 dB 1.0 1.5 2.0 2.5 3.0 3.5 4.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Frequency (GHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAADSS0014 Digital Attenuator, 4-Bit, Single Control 30 dB, 0.05 - 4.0 GHz Typical Performance Curves Input IP3 @ 0.5 GHz 50 Rev. V2 Input IP3 @ 2 GHz 50 IIP3_Low IIP3_High 48 IIP3_Low IIP3_High 48 46 46 44 44 42 42 40 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 40 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Attenuation Attenuation Lead Free 3 mm 16-Lead PQFN Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MAADSS0014 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |